Honda Power/Solenoid Wiring

Lutin

Administrator
Staff member
Forum Supporter
Posting this here first, rather than "elsewhere". ;)
 

Attachments

  • Honda Power Solenoid Wiring.jpg
    Honda Power Solenoid Wiring.jpg
    45 KB · Views: 756

Lutin

Administrator
Staff member
Forum Supporter
Posting this here first, rather than "elsewhere" - again. ;)



The Red and Red/White wires are heavier gauge as they are the "power" wiring -

Red - this leads from the solenoid connector to the Ignition Switch.

Red/White - this is the power (charging) feed from the Reg/Rec.

These two wires are connected together within the solenoid and connect to one end of the 30 Amp fuse. The other end of the fuse leads to battery +Ve.


The two smaller gauge wires - Yellow/Red and Green Red - actually operate the solenoid's coil when the Start button is operated.

Yellow/Red - this leads from the Start Switch.

Green/Red - this leads to the Clutch, Side-stand and Neutral Switches.
 

Attachments

  • AT and TA solenoid connections.jpg
    AT and TA solenoid connections.jpg
    16.1 KB · Views: 647
Top